2013 Kia Sorento Check Engine Light

2013 Kia Sorento Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that miniature light on your vehicle’s dashboard suddenly illuminates, but in reality, it is not something that should cause you to shut down in fear right away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also known as the OBD (on-board computer diagnostic system) in your Sorento. There are hundreds of apparent codes that your check engine light can represent. While that sounds daunting, with a miniature patience, tackling crucial diagnostics will give you useful knowledge about your vehicle and will also allow that Check Engine Light to do what it is really supposed to do: be your guide. Regrettably, noticeable and helpful vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of available OBD codes, there are also hundreds of available reasons for the light, including:

• Bad Spark Plugs
• O2 Sensor
• Emissions controls issues
• Computer output circuit issues
• Loose Gas Cap or Missing Gas Cap
• Transmission issues
• Old Battery
• Ignition system faults
• Fuel and air metering systems problems

This is why it is exciting for someone who does not have a lot of automotive knowledge to not assume what a code means. When your check engine light comes on, you should get it checked out quickly by a certified Kia mechanic. Call Nalley Kia at 7702885283 today or schedule your check engine light service online today! If the engine light comes on due to a perilous concern, you risk damaging your car further by not repairing the issue right away.

2013 Kia Sorento Check Engine Light

A flashing light indicates that the problem is threatening and if not taken care of immediately may result in leading damage to the vehicle. If the check engine light in your 2013 Kia Sorento starts flashing, that means that the problem needs immediate attention and your Kia should be brought in immediately. This glaring light ordinarily illustrates a exacting engine misfire allowing unburned fuel to be discarded into the exhaust system. There it can urgently raise the temperature of the catalytic converter to a point where damage is conceivable, requiring an expensive repair. Some owners ask if spark plugs cause the check engine light to flash? This can exactly be the cause. A bad, historic or dirty spark plug can cause the engine to misfire. If your check engine light is flashing, please contact our team of automotive experts at Nalley Kia immediately by calling 7702885283. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a very fancy repair.

Is it safe to drive your 2013 Kia Sorento with the check engine light on?

This question is not very simple because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be dependable to commute. This is continually indicated by a steady glow of the check engine light. If you notice a difference in the performance of the vehicle, it could be an indication of a more extraordinary problem. If the check engine light is flashing, this means that there is a extraordinary issue and it is recommended to service your Kia Sorento immediately. Call the experts at Nalley Kia by dialing 7702885283 so you can describe the issues. Or reduce your speed and bring your 2013 Kia to our certified technicians as soon as likely.

2013 Kia Sorento Check Engine Light Flashing

Although there are countless ability causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are bountiful logical causes including something as miraculous as a loose gas cap. Back-up logical reasons for a Check Engine Light are dirty mass airflow sensor, faulty head gasket, faulty emissions control part, damaged oxygen sensor, a malfunction with the fuel injection system, or defective spark plugs to name positive. No matter what is the root cause of the Check Engine Light, we have the Kia Certified Technicians and the certified service protocol to isolate the root problem and repair it as basic to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Kia issue was fixed.

Every 2013 Kia Sorento was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its hard systems. The sensors are frequently detecting conditions while sending data to the electronic control unit. If the electronic control unit detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what exactly is incorrect nor what to do about it. That’s where we come in; Nalley Kia provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Excessively Qualified Service trained.

How many miles can you drive with the check engine light?

If you check engine light is flashing, we recommend that you pull over and contact Nalley Kia to aid determine if your vehicle is safe to drive in or if we recommend a tow truck. It could be anything from a bad sensor to plug wires needing to be changed. Since each check engine code has its own level of severity, it is troublesome to predict how bountiful miles you can drive with the warning light on. The safest bet is to decipher the code and then plan your strategy accordingly.

Will the check engine light reset itself?

The check engine light on your 2013 Kia Sorento will usually shut itself off if the issue or code that caused it to turn on is fixed. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going realistic, and you did a lot of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2013 Kia Sorento light will go off after about 20-40 miles. If you commute over that amount and the light is still on, you will need to bring it in to Nalley Kia so the light and code can be double-checked and reset.

How much does it cost to get the engine light checked?

The average cost for a check engine light diagnosis & testing is typically between $88 and $111. The practical news, Nalley Kia offers complimentary multi-point inspections and free diagnostics, in most cases, to help determine the cause of your check engine light. The check engine light warns of issues ranging from a gas cap that's not correctly tightened to a more curious failure like a damaging catalytic converter or a problem with one of the car's oxygen sensors, so it practical to get the normal code reading and diagnosis.

What could cause the check engine light to come on in a 2013 Kia Sorento?

When your check engine light comes on, this could be as indisputable as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a hazardous problem that could cause hazardous damage to your engine and come with a considerable repair bill. Depending on your make and model, the check engine light will illuminate or blink. A steady glow continuously means something less hazardous but a flashing check engine light indicates that your vehicle’s engine is in hazardous trouble and service is essential immediately. If your check engine light is flashing in your 2013 Kia Sorento, we extraordinarily recommend not to drive the vehicle and schedule Kia service today. Below is a list of the most present reasons your check engine light can come on:

• Your 2013 Kia Sorento has a vacuum leak. Every Kia Sorento has a vacuum system that performs a wide variety of functions. The vacuum system also helps cut down detrimental emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can dry out and crack, especially if they’re exposed to imposing heat or extreme cool.
• Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, established as the O2 sensor, measures the amount of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be less factual when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause wear and tear to your catalytic converter and your 2013 Kia Sorento's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to endorse the right mixture of air and fuel that enters the cylinders in your engine. A bad O2 sensor can also cause a car to fail an emissions test.
• Your catalytic converter is bad or going bad. The catalytic converter is a part of your 2013 Kia Sorento’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is frequently caused by neglected maintenance, which is why Nalley Kia offers a complimentary multi-point inspection with every Kia service. If you have an issue with your catalytic converter and don't get it repaired, your 2013 Kia Sorento will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause disparate problems from overheating.
• One of the most common and frequent cause is that your 2013 Kia Sorento gas cap is loose, damaged or missing. The gas cap for your 2013 Kia Sorento serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a bad fuel cap? If your gas cap is historic or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't fancy. If your check engine light turns on shortly after you put gas in your 2013 Kia Sorento, original thing you should check is to make fearless the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
• The battery is low or dead. The battery in your 2013 Kia Sorento is every skittish. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did a lot decades ago, and they don't really require maintenance. The price of a new one depends on the type of Kia you drive, but check our natural service coupons and specials.
• New Spark Plugs or Plug Wires are needed for your 2013 Kia Sorento. The spark plugs are the part of your engine that ignites the air/fuel mixture in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires bring the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are bad or historic, you will experience scanty performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or wear and tear to ignition coils and O2 sensors, first-rate to more fancy repairs.
• Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Kia Sorento is what determines how much fuel is needed to run your engine efficiently by measuring the amount of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to substantial changes, like altitude. If your Kia Sorento is having trouble starting, idling rough or has a speedy change in the position of the throttle pedal, this could be a sign of a bad mass airflow sensor.
• Issues with any aftermarket items. An aftermarket alarm, exhaust or disparate item can wreak havoc on your 2013 Kia Sorento if it’s not installed properly. These aftermarket parts and accessories can drain the battery, trigger the check engine light, or even prevent the vehicle from starting. If these issues sound established, bring your Sorento to Kia and have our team of certified mechanics ensure that your aftermarket items were installed correctly and aren't causing any issue. Getting accessories, especially aftermarket parts and accessories, or using OEM parts original place might price a microscopic bit more but could save you money from having to get scanty work and wear and tear caused by scanty installation work corrected.

Check Engine Light Service 2013 Kia Sorento

What do you do when you’re driving along in your Kia Sorento and suddenly, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Kia owners, your heart sinks a little because you have little idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t mean you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your 2013 Kia Sorento checked as soon as likely. Ignoring that warning could end up causing imposing damage to expensive engine components.

When your 2013 Kia Sorento's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t polite, a computer turns on your check engine light. This amber or yellow light is frequently labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is read with an electronic inspect tool that is used by our Kia auto repair mechanics at Nalley Kia. There are also a number of relatively bargain code readers that are designed for do-it-yourselfers, should you opt for that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an experienced professional to determine the issue and repair it.

What Does the Check Engine Light Mean?

One of the most continuously misunderstood lights or indicators in your 2013 Kia Sorento is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a lot chance ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a collection of things for your 2013 Kia Sorento. Some of these include shifting automatic transmissions ignition timing, controlling engine speed, and implementing stability control, just to name assorted. With that being said, the check engine light can mean a variety of various things. It can be as logical as your gas cap being loose or as perilous as engine knocking. If your check engine light is on in your 2013 Kia Sorento, contact Nalley Kia. Our Kia service department can help you find out what code is turning your check engine light on or inspect why your check engine light is shining. Contact Nalley Kia today!